HK LIANYIXIN INDUSTRIAL CO., LIMITED
info@lianyixinic.com+86 158 1854 8834

Продукция

AD8557ARZ-REEL7

AD8557ARZ-REEL7 · Analog Devices (ADI) · Интегральные схемы

Информация о продукте

Артикул:
AD8557ARZ-REEL7
Количество усилителей:
Одноканальный
Входной ток смещения (Ib):
18nA

Запросить цену

Цена, наличие и сроки поставки подтверждаются в предложении.

Запросить цену

Технические характеристики

Одна модель · единые параметры

Идентификация компонента

ПараметрЗначение
СерияAD8557ARZ-REEL7

Электрические характеристики

ПараметрЗначение
Количество усилителейОдноканальный
Входной ток смещения (Ib)18nA
Входное напряжение смещения (Vos)2μV
Коэффициент подавления синфазного сигнала (CMRR)85dB
Выходной ток25mA
Ток покоя (Iq)1.8mA
Однополярное питание2.7V – 5.5V
Максимальная разность напряжений питания (Vdd−Vss)5.5V
Входной ток смещения нуля (Ios)4nA
Рабочая температура-40°C – +125°C

Корпус и механика

ПараметрЗначение
Произведение усиления на полосу2MHz

Параметры относятся к указанной модели. Сверьте корпус и условия измерения с документацией производителя.

Исходные поля · английский · 3

Часть исходных полей ожидает перевода и приведена отдельно на английском.

Product CataloguePrecision Operational Amplifiers
Input Offset Voltage Temperature Drift (Vos TC)65nV/℃
Noise Density (eN)32nV/√Hz @ 1kHz

Описание

Локализованное описание пока недоступно. Ниже приведены параметры этой модели.

Открыть английский оригинал

Product Overview The AD8557 is a zero-drift sensor signal amplifier featuring digitally programmable gain and output offset capabilities. This amplifier is designed to effortlessly and precisely convert variable pressure sensor and strain bridge outputs into defined output voltage ranges, whilst also accurately amplifying numerous other differential or single-ended sensor outputs. Employing proprietary low-noise auto-zero and DigiTrim technology, the AD8557 delivers a precise and flexible signal processing solution within a compact package. Gain can be digitally programmed over a wide range from 28 to 1300 via a serial data interface. Gain adjustment is fully simulated in-circuit before being permanently programmed using reliable polysilicon fuse technology. The output offset voltage is similarly digitally programmable and proportional to the supply voltage. Beyond its exceptionally low input offset voltage, input offset voltage drift, and extremely high DC and AC common-mode rejection ratios (CMRR), the AD8557 incorporates a pull-up current source at the input pins and a pull-down current source at the VCLAMP pin. Output clamping via an external reference voltage enables the AD8557 to safely and accurately drive low-voltage analogue-to-digital converters (ADCs). When used with an ADC sharing the same supply as the reference, system accuracy remains unaffected by normal supply voltage variations. Output offset voltage adjustment resolution is better than 0.4% of the difference between VDD and VSS. Locking fine-tuning after gain and offset adjustment further ensures field reliability. The AD8557 operates over a temperature range of -40°C to +125°C. This device is powered by a single supply voltage ranging from 2.7 V to 5.5 V and is available in an 8-pin SOIC and a 4 mm × 4 mm, 16-pin LFCSP package. Product Features Ultra-low offset voltage: Maximum 12 μV across the entire temperature range Ultra-low input offset voltage drift: Maximum 65 nV/°C High common-mode rejection ratio: Minimum 96 dB Digitally Programmable Gain and Output Offset Voltage Gain range from 28 to 1300 Compliant with automotive application requirements Single-bus serial interface Stable with any capacitive load SOIC and LFCSP packages Operating voltage range from 2.7 V to 5.5 V Applications Automotive sensors Pressure and position sensors Precision current sensing Thermocouple amplifiers Industrial scales Strain gauges

Запросить цену

Кому
LIANYIXIN (info@lianyixinic.com)

Цена, наличие и сроки поставки подтверждаются в предложении.

Выбранные компоненты

Вся продукция
AD8557ARZ-REEL7

AD8557ARZ-REEL7

WhatsApp